MAD Helper Springs + KONI FSD – RAM ProMaster – SD-138158
Front reinforced springs paired with KONI FSD for RAM ProMaster 1500/2500/3500 (2014–present, FWD). Adds ≈ +35 mm of front lift with calmer steering and better control under nose weight.
Fitment
- Vehicle: RAM ProMaster 1500/2500/3500, 2014–present (Fiat Ducato X250/X290 platform)
- Axle: Front — replaces OE front coils (MacPherson strut) and front shocks
- Lift: ≈ +35 mm(≈ 1.38") at the front
- Use: camper nose weight, bullbar/winch, racking up front
- Approval: TÜV part approval; fitting manuals included
Specs
| SKU | SD-138158 |
| Kit contents | 2× front reinforced springs (MAD) + 2× front shocks (KONI FSD) + manuals |
| Lift | ≈ +35 mm (≈ 1.38") |
| Install time | ≈ 120 minutes (spring compressors required); alignment recommended |
| Price | Get a Quote |
Improves support and steering feel with nose weight. Does not change GVWR or towing ratings.
What you’ll feel
- Front ride height restored under accessory/camper weight
- More composed steering and less brake dive
- KONI FSD smooths sharp impacts without float
Install overview
- Remove front strut assemblies per workshop manual.
- Use approved spring compressors to swap coils; transfer OE seats/dust boots as specified.
- Install KONI FSD front shocks. Refit struts; torque at ride height.
- Wheel alignment required after front spring work. Re-torque after ~100 miles.
