MAD Reinforced Front Springs – Mercedes Metris (W447) – HV-098098

Tighter front-end control and a clean +15 mm (≈ 0.59 in) lift for Metris/Vito W447. These TÜV-approved reinforced front springs (≈25% rate increase) sharpen steering feel and help carry accessories and daily load—no compressors, no air lines.

See Specs Fitment Install Guide

Key highlights

  • Lift (front):+15 mm (≈ 0.59 in)
  • Rate: reinforced front springs (≈25%)
  • Approval: TÜV certified
  • Install time:~60 minutes
  • No change to GVWR/towing ratings(support & stance only)

Fitment & compatibility

  • Vehicle: Mercedes Metris / Vito W447(10/2014 – present)
  • Engine: incl. e-Vito
  • Axle affected: Front

Actual ride height change varies with vehicle spec and payload. Measure before/after on level ground.

Technical specs

Spec Value
SKU / Set code HV-098098
Type Reinforced front springs
Lift amount (front) +15 mm (≈ 0.59 in)
Rate increase ≈ 25% (front)
Approval TÜV
Platform Mercedes W447 (Metris/Vito), incl. e-Vito
Assembly time ≈ 60 min
Production years 10/2014 – present
Price $589.00(USD)

Prices include tax and local import fees; exclude fitting. Ask for a quote.

Install guide (overview)

Follow the kit manual. Support the vehicle safely. Torque to spec. Suspension upgrades improve support and stance but do not change GVWR or towing ratings.

Front (strut)

  • Remove front strut per workshop manual; use spring compressors at steps 4 & 5.
  • Transfer OE components (seats, bump stop, dust cover) as specified; install the MAD spring in the correct orientation.
  • Re-fit strut and exterior parts; torque to specification.
  • Wheel alignment recommended after install (multi-link front geometry).

After installation

  • Readjust headlight aim and, if present, camera/radar ADAS systems.
  • Road-test; re-torque fasteners after ~100 miles.

Downloads

Open in a new tab. Follow the kit manual and safety procedures.