MAD Reinforced Rear Springs – Mercedes Metris (W447) – HV-098168
Maximum rear support for loaded Metris vans. MAD’s TÜV-approved reinforced main springs (HV-098168) are tuned for vehicles that carry frequent cargo or equipment — no air lines, no compressors, minimal maintenance.
Key highlights
- Support: maximum rear spring support for sustained loads
- Minimum load: 300 kg (≥ 662 lb)
- Approval: TÜV certified
- Axle: Rear (main springs)
- Install time:~30 minutes
- No change to GVWR/towing ratings(stability & support only)
Fitment & compatibility
- Vehicle: Mercedes Metris / Vito W447(10/2014 – present), incl. e-Vito
- Exclusions: Raised 4Matic not supported
- Use case: trades vans, parcel delivery, equipment-heavy builds
- Ride height note: reinforced rate may raise unloaded rear slightly; actual stance depends on payload and spec
Technical specs
| Spec | Value |
|---|---|
| SKU / Set code | HV-098168 |
| Type | Reinforced main springs (rear, constant-load) |
| Minimum load | 300 kg (≥ 662 lb) |
| Approval | TÜV |
| Platform | Mercedes W447 (Metris/Vito), incl. e-Vito |
| Exclusions | Raised 4Matic |
| Assembly time | ≈ 30 min |
| Price | $542(USD) |
Prices shown include tax and local import fees. Exclude fitting. Ask for a quote.
Install guide (overview)
Read the kit manual first. Support the vehicle safely and torque to spec. Helper/reinforced springs improve support and stability but do not change GVWR or towing ratings.
Tools
- Lift or jack + axle stands
- Socket/Torx set
- Torque wrench
- Pry bar
- Eye protection & gloves
Steps (summary – rear)
- Park level; chock front wheels. Lift rear and safely support the axle.
- Remove wheels if needed for access.
- Relieve spring load; remove OE rear springs per manual.
- Install reinforced springs and supplied hardware in correct orientation.
- Center springs, check clearances (brake lines/ABS wiring), torque all fasteners.
- Reinstall wheels; road-test; re-torque after ~100 miles.
FAQs
Does HV-098168 increase payload or towing?
No. It improves support and control under load but does not change manufacturer ratings.
What does “minimum load 300 kg” mean?
The springs are tuned for at least 300 kg (≈ 662 lb) rear load. Running well below this may feel firm and can raise the rear slightly when empty.
Is it compatible with e-Vito?
Yes, e-Vito is included. Raised 4Matic is excluded.
Do I need an alignment after install?
Rear spring work doesn’t affect front toe/camber. Inspect tire wear and re-torque after ~100 miles.
Looking for a balanced lift instead? See HV-098151 (+15/+30 mm lift) or browse all Metris kits.
