MAD Lift Springs – Mercedes Metris (W447) – HV-098151

Raise and support your Metris with MAD’s TÜV-approved lift springs. Kit HV-098151 delivers a balanced lift and maximum rear support for vans that carry real-world loads—without compressors or air lines.

See Specs Fitment Install Guide

Key highlights

  • Lift:+15/+30 mm (≈ 0.59/1.18 in) front/rear
  • Support: maximum rear spring support for loaded vans
  • Minimum load: 150 kg (≈ 331 lb)
  • Approval: TÜV certified
  • Install time:~90 minutes
  • No change to GVWR/towing ratings(stability & support only)

Fitment & compatibility

  • Vehicle: Mercedes Metris / Vito W447(10/2014 – present), incl. e-Vito
  • Exclusions: Raised 4Matic not supported
  • Use case: vans with frequent cargo/equipment weight, light camper builds
  • Axles affected: Front & Rear (front +15 mm / rear +30 mm nominal)

Note: Actual lift may vary with vehicle spec and payload. Always measure before/after on level ground.

Technical specs

Spec Value
SKU / Set code HV-098151
Type Lift springs (front & rear)
Lift amount +15/+30 mm (≈ 0.59/1.18 in)
Minimum load 150 kg (≈ 331 lb)
Approval TÜV
Platform Mercedes W447 (Metris/Vito), incl. e-Vito
Exclusions Raised 4Matic
Assembly time ≈ 90 min
Price $—(USD, to be confirmed)

Prices shown exclude tax, fitting and local import fees. Ask for a quote.

Install guide (overview)

Follow the kit manual. Support the vehicle safely. Torque to spec. Helper/lift springs improve support and ride height but do not change GVWR or towing ratings.

Tools

  • Lift or jack + axle stands
  • Socket/Torx set
  • Torque wrench
  • Pry bar
  • Eye protection & gloves

Steps (summary)

  1. Park level, chock wheels; lift and safely support the van.
  2. Remove wheels as needed for access.
  3. Relieve spring load; remove OE springs (as applicable) per manual.
  4. Install MAD lift springs and hardware in the correct orientation.
  5. Center springs, check clearances (brake lines/ABS wiring), torque all fasteners.
  6. Reinstall wheels; road-test; re-torque after ~100 miles.

FAQs

Does this increase payload or towing?

No. It improves support and stance but does not change manufacturer ratings.

What lift does HV-098151 provide?

+15 mm front and +30 mm rear (≈0.59/1.18 inches), depending on vehicle spec and payload.

Is HV-098151 compatible with Raised 4Matic?

No — Raised 4Matic is excluded.

Looking for another Metris kit? See all options on the Metris kits page.