Toyota RAV4 Helper Springs & Lift Kits — Stable, level, capable.
MAD helper & reinforced coils (and select lift kits) keep your RAV4 level under load and composed on rough roads — with TÜV/RDW-TUV approvals.
TÜV/RDW-TUV
Bolt-on install
No maintenance
Prices in USD incl. tax & import; excl. fitting.
How it works
Helper springs support the rear coils; reinforced coils replace OE for higher rate; lift kits raise ride height with matched spring sets.
- Rear: auxiliary coil (“coil assist”)
- Reinforced coils: higher rate replacements
- Lift kits: matched front/rear spring sets
What you’ll feel
- Less rear sag with payload
- Reduced roll & better control
- Improved stance (lift kits)
Why MAD vs. air
- No compressors, valves, or leaks
- Simple bolt-on hardware
- TÜV part approval & manuals
Fitment summary
Gen 2 (XA20), Gen 3 (XA30), Gen 4 (XA40), Gen 5 (XA50)
Toyota MC (Gen 2–4), TNGA-K (Gen 5)
TÜV, RDW-TUV
RAV4 kits
| Photo | SKU / Price | Line | Generation | Build years | Lift | Approval | Install (min) | Weight | Remarks |
|---|
Prices in USD. Prices include tax and local import fees; exclude fitting. TÜV/RDW-TUV approval unless noted.
FAQ
Do these change payload or towing?
No. They improve support and control but do not alter manufacturer ratings.
Will the ride be harsh when empty?
Minimal change; helper and progressive rates engage under load.
Can I install them myself?
Yes. Basic tools and stands/lift. See install time per kit; alignment recommended after front spring work.
Upgrade your Toyota C-HR today and enjoy a safer, more stable ride — even when fully loaded.
Looking to
improve
the suspension performance of your
Toyota C-HR? Whether you drive a first-generation gas model (2018–2022) or are waiting for the upcoming fully electric C-HR, helper springs offer the perfect solution for extra load support, better handling, and long-term suspension protection.
Improved Ride Height and Stability
Enhanced Driving Safety
Better Comfort and Control
Less Wear and Maintenance
🔧 Why Add Helper Springs to Your C-HR?
The Toyota C-HR is a compact crossover often used for commuting, weekend getaways, and daily errands. But when the vehicle is fully loaded — with passengers, luggage, or bike racks — the rear suspension can start to sag. That’s where helper springs come in:
- Maintain proper ride height under load
- Reduce bottoming out and rear-end sag
- Improve handling and driving stability
- Extend the life of your original suspension system
✅ Compatible with U.S. C-HR Models:
Our current helper spring kits are suitable for:
- Toyota C-HR (2018–2022)
Gas-powered models with torsion beam rear axle (common in U.S. market)
Ideal for users who carry cargo, tow light loads, or travel fully loaded
Note: Always check your vehicle’s rear suspension type before ordering. Not all trims have the same layout.
🚗 Coming Soon: Helper Springs for the All-New Toyota C-HR EV (2026+)
Toyota has announced the return of the C-HR to the U.S. market — this time as a fully electric crossover built on the new e-TNGA platform. While technical specs are still emerging, we expect similar rear suspension dimensions and load behavior.
We're actively working on a helper spring kit tailored for this new model. If you’re planning to drive the 2026+ C-HR EV fully loaded, with cargo, passengers, or towing equipment, helper springs may again be a valuable upgrade.
✅ 4 Reasons to Install Helper Springs on Your Toyota C-HR
Prevent Rear Sag Under Load
Passengers, luggage, bike racks or tools — extra weight can cause your C-HR to sit low in the back. Helper springs restore a level ride height and prevent bottoming out.
Improve Handling and Ride Stability
Reduce sway, bounce, and instability when cornering or braking under load. Enjoy a smoother, more controlled drive — even when fully packed.
Protect Factory Suspension Components
Helper springs reduce the strain on OEM shocks and coil springs, helping extend the life of your rear suspension system.
Fast, Bolt-On Installation
No welding or cutting required. Kits come with all necessary hardware and install in under 90 minutes with basic tools.
🛠 Easy Installation, Durable Performance
Our kits are bolt-on and include all necessary hardware and clear instructions. Installation typically takes under 90 minutes with basic tools. Built from heavy-duty steel and protected with anti-corrosion coatings, they’re made to last.
